Sign up to stay informed about our latest restoration projects, industry news and more
By signing up, you agree to the Carrosserie Privacy Policy
Start your restoration journey with us today
- 01833 630 011
- 07973 616 478
The Project
This 1958 Austin Healey Sprite came into our workshop in March 2025 for repairs and paintwork on the bonnet and wheel arches. Also, engine works will be carried out to get it running smoothly and then a general servicing before it goes back to the owner.
13th March 2025: The car has just arrived and a priority list of works will be created before work commences.
4th April 2025: Oselli engine has been tuned and carbs setup. The car has been stripped down to begin repairing corrosion on the sills and bonnet then It will be ready for paint.
1st May 2025: A total rethink on repair of the bonnet was needed as the metal was found to be too thin to weld. Leading was the next option, but the tinning butter would not take, so we had to go with brazing instead. Just as strong as welding but more gentle on the metal. Original paintwork on the hood has been stripped and areas of rust removed. It’s now being prepped for epoxy primer.
24th June 2025: Prep after welding has started. Epoxy primer has been applied and now working through filling over the welded areas, plus filling dents. The bonnet has had it’s final primer coat and soon the top coat will be applied. Works are also being done on the sills and rear arches, so this project will be completed soon.
7th July 2025: Primer complete, extra protection added to corners. Primer rubbed down and ready for colour coat. In paint and wiring/fasteners locations. Tidy up underside of bonnet, strip out wiring and apply some black stonechip. Mask out car and apply stonechip to rear wheel arches and along lower rear panel and lower rear wings. Fix bonnet/front wing trims. Mask and paint.
16th July 2025: All of the body prep has been completed. The paint team have applied a coat of epoxy primer to the sill, rear arches and bonnet, then a final coat has been applied. The car has been polished and is just about ready to be collected by the owner.
The Austin-Healey Sprite is a small open sports car which was announced to the press in Monte Carlo by the British Motor Corporation (BMC) on 20 May 1958, just before that year’s Monaco Grand Prix. It was intended to be a low-cost model that ‘a chap could keep in his bike shed’, yet be the successor to the sporting versions of the pre-war Austin Seven. The Sprite was designed by the Donald Healey Motor Company, which received a royalty payment from the manufacturers BMC. It first went on sale at a price of £669, using a mildly tuned version of the Austin A-Series engine and as many other components from existing cars as possible to keep costs down.
The Sprite was made at the MG sports car factory at Abingdon, Berkshire (actually now in Oxfordshire) and it was inevitable that the success of the design would spawn an MG version known as the Midget, reviving a popular pre-war model name. Enthusiasts often now refer to Sprites and MG Midgets collectively as ‘Spridgets’.
The little Sprite quickly became affectionately known as the ‘Frogeye’ in the UK and the ‘Bugeye’ in the US, because its headlights were prominently mounted on top of the bonnet, inboard of the front wings. The car’s designers had intended that the headlights could be retracted (like the much later Porsche 928) with the lenses facing skyward when not in use. However, production cost-cutting by BMC led to the flip-up mechanism being deleted and so the headlights were simply fixed in a permanently upright position, giving the car its most distinctive feature.
The rack and pinion steering and suspension were derived from the Morris Minor 1000. The front suspension was a coil spring and wishbone arrangement, with the arm of the Armstrong lever shock absorber serving as the top suspension link. The rear axle was both located and sprung by quarter-elliptic leaf springs, again with lever-arm shock absorbers. There were no exterior door handles – you reached inside to open the door. There was also no boot lid, and access to the spare wheel and luggage compartment was gained by tilting the seat-backs forward and reaching under the rear deck, a process likened to potholing by many owners.
The Sprite’s chassis design is notable in that it was the world’s first volume-production sports car to use integrated construction, where the sheet metal body panels (apart from the bonnet) take many of the structural stresses. The two front ‘chassis’ legs which project forward from the passenger compartment, however, stop the shell being a full monocoque. The design is said to have been influenced by the Jaguar D-type.
The BMC Competition Department entered Austin Healey Sprites in major international races and rallies, their first major success coming when John Sprinzel and Willy Cave won their class on the 1958 Alpine Rally. Private competitors also competed with much success in Sprites. Because of its affordability and practicality, the Austin Healey Sprite was developed into a formidable competition car, assuming many variants by John Sprinzel, Speedwell and WSM. The Sebring Sprite became the most iconic of the racing breed of Austin Healey Sprites. Many owners use their Austin Healey Sprites in competition today, fifty years after its introduction.
The Mark II used the same 948 cc engine (engine code 9CG) but with larger twin 1 1/4 inch SU carburettors increasing power to 46.5 bhp and a close-ratio gearbox. The bodywork was completely revamped, with the headlights migrating to a more conventional position in the wings, either side of a full-width grille. At the rear, styling borrowed from the soon-to-be-announced MGB gave a similarly more modern look, with the added advantages of an opening boot lid and conventional rear bumper bar. The result was a much less eccentric-looking sports car, though at the expense of some 100 lbs extra weight. In contrast to the ‘frogeye’, the later cars are often collectively referred to as ‘square-bodied’ Sprites by enthusiasts.
An MG version of the car was introduced in May 1961 as, ‘the new Midget,’ reviving a model name which had been a great success for the MG Car Company in the 1930s. The Midget was to prove more popular with the public than the Sprite and by 1972 had completely supplanted it within the BMC range. In October 1962 both Sprites and Midgets were given a long-stroke 1098 cc engine (engine code 10CG), which was also fitted in single carburettor form to the Austin A40 and Morris Minor 1000 (which nevertheless remained the Minor 1000). A strengthened gearbox with Porsche (baulk-ring) synchromesh was introduced to cope with the extra power – a heady 56 bhp. Front disc brakes were also introduced at the same time and wire wheels became an option.
Innocenti also produced their own version of the Sprite, using the standard production underframe (initially shipped out from England), but clothed in the sharpest of Italian suits, styled by the American Tom Tjaarda, then working at Carrozzeria Ghia. The Innocenti 950 Spider and later 1100 Spider were produced from 1961 until 1968.
The Mark III Sprite was also marketed as the Mark II MG Midget – differences between the two were again restricted to minor trim detailing. Though still 1098cc, the engine had a stronger block casting and the size of the crankshaft main bearings was increased to two inches (engine code 10CC).
A new (slightly) curved-glass windscreen was introduced with hinged quarterlights and wind-up side windows. Exterior door handles were provided for the first time, with separate door locks. Though the car could now be secured, with a soft-top roof the added protection was limited. The rear suspension was modified from quarter-elliptic to semi-elliptic leaf springs, which gave a more comfortable ride for a near-negligible weight penalty. Though scarcely sybaritic, these changes helped the Sprite and Midget compete with the recently-released Triumph Spitfire.
It has been suggested here that there was a “short run of vehicles (unknown number) in late 1963 with the Mk II body/interior but with the Mk III undercarriage/suspension modifications”. Although no source is given for this assertion, the basis may be more than speculation. There are numerous recorded instances throughout Sprite and Midget production where specification changes do not precisely concur with model changes. At the very least, the prototypes for the half-elliptic models are likely to have been taken from the production line and some of these may well have been subsequently sold. However, the number of such cars would have been small.
The next upgrade was presented at the London Motor Show in October 1966. Besides receiving the larger 1275 cc engine (which disappointed enthusiasts by being in a lower state of tune than that of the Mini-Cooper ‘S’), the Mark IV and its cousin the Mark III MG Midget had several changes which were more than cosmetic. Most notable is the change from a removable convertible top, which had to be stowed in the boot, to a permanently-affixed, folding top of greatly improved design, which was much easier to use. Separate brake and clutch master cylinders were fitted, as car manufacturers’ thoughts began to turn to making their products safer. On US market versions the larger engine sacrificed some of its performance from 1968 on, through the use of smog pumps and other modifications to comply with federal emission control requirements. 1969 was the final year the Sprite was exported to the US.
Cutting costs, BL declined to renew its association with Donald Healey, so the final 1,022 Sprites built in 1971 were simply “Austin Sprites.” There was no direct successor, as BL’s extensive range already contained the MG Midget, which was identical to the Sprite except for badging, and the similarly dimensioned and priced Triumph Spitfire.
13th March 2025
4th April 2025
1st May 2025
24th June 2025
7th July 2025
16th July 2025
Are you ready to start your restoration journey with us?
- 01833 630 011
- 07973 616 478